Learn how to fix an electric or manual recliner chair. Knowing where the problem is might be quite helpful in finding a solution. Understanding how it works allows you to fix any problems that happen. This post provides simple steps to fix it. The following are things that anyone can do. Additionally, the money saved can be highly motivating.
Contents
how to fix an electric recliner chair
With the press of a button, an electric recliner can have you reclining back in style in seconds. However, this supercharged convenience might cause a number of problems.
Take a look at the list below for our electric recliner repair solutions.
Loose connection cables
This can happen if you move the recliner or vacuum around it; it’s simple to accidentally knock the cables off. Check any connections at the back of the recliner for any cables that may be slightly unplugged and push them back in. It simply takes one slightly loose cable to prevent the recliner from functioning.
When reclining, the recliner will stop midway.
If your recliner stops halfway back, it could indicate a defective motor that has to be replaced. Because this is a more technical issue, you will need to call Lounge Repair Guys, an electric chair repair company with the knowledge and skills to fix electric recliners.
Faulty transformer
The small black box at the bottom of your recliner serves as its transformer. It delivers electric current to the motor and is an essential component of an electric chair. When it works, it will light up (usually in green). If it’s malfunctioning and not receiving electricity, the light won’t work. To test it, try replacing it with the transformer from another electric recliner. If it still does not function, you may easily replace it by purchasing a new transformer from Lounge Repair Guys, your local recliner chair repair professional, and installing it yourself. Contact Lounge Repair Guys, the electric chair repair specialists, for guidance or components.
Recliner will not work after a storm.
A power surge during a thunderstorm can trigger an electrical problem in the transformer. As previously said, you can repair a defective transformer yourself.
If your recliner’s remote control does not work, it could be due to faulty buttons, a faulty motor, or a ripped cable within the chair. Cables that are connected to a specific portion of the chair, such as the motor or side buttons, must be replaced entirely. Other cables, on the other hand, can be simply changed if they are damaged while being transported, severed by an internal device, or chewed by a pet.
If the transformer’s light illuminates and power is supplied, it indicates that the chair buttons or remote control are malfunctioning. Make sure to check the batteries in the remote control. It could be as simple as a couple new batteries!
How to fix a Manual Recliner chair
- Manual recliners do not have an internal motor or electric operating system; instead, users can adjust the seat position with a lever or a manual push/pull mechanism. Manual recliners have a simpler functioning system than electric recliners, therefore they have fewer features and a smaller range of reclining positions.
- Mechanical recliners have a handle on the side of the chair lever that, when pulled, raises the footrest. The handle operates by a cable and locking springs.
- Here are some frequent mechanical recliner issues and potential solutions:
Recliner handle does not work.
If you pull the recliner handle and nothing happens or the chair just partially reclines, it could be due to a snapped or loose wire or a broken handle. There are some easy recliner chair repair fixes you can try below, and these parts are easily changed.
Loose cable
The side of your mechanism. See the handle right here; when I pull that lever, you activate this cable, which pulls this lever down. When you pull that lever and nothing happens, it’s possible that this cable has come free right here. So one of the main difficulties I perceive is that it occasionally pops loose.
Broken cable
You may replace a broken cable yourself by turning the chair upside down and locating where the cable (also known as a parachute cable) connects to the mechanism at the bottom. Remove the cable by loosening the clamp using pliers. After replacing the cable, screw the handle back onto the recliner.
Recliner opens but does not close.
If your recliner continues to open but does not lock, it may be due to a broken or stretched locking spring. This can be simply replaced by contacting Lounge Repair Guys, a reclining chair repair professional.
Recliner makes grinding or clunking noises.
This is a common indicator of a bent mechanism inside the recliner, and in most situations, it must be replaced.
Recliner is leaning.
If the recliner footrest leans when it is up, the reclining mechanism scissors may be twisted or broken, requiring adjustment. Older chairs’ frames may have loosened over time.
how to fix a leaning recliner chair
If your recliner chair leans to one side, it can affect your comfort and posture. Here’s how you can fix it:
Balancing a recliner chair mechanism.
- Inspect the back of the chair for any loose screws or brackets.
- With a screwdriver or pliers, tighten any loose screws or brackets.
- Sit in the recliner chair and see if it is appropriately balanced. If not, adjust the tension in the footrest or tighten the screws as necessary.
Adjusting the reclining angle in a recliner chair mechanism.
If the reclining angle of your recliner chair is not comfortable, you can change it to your liking. Check for tension adjustment knobs or levers on the recliner mechanism and make the appropriate changes until you reach the desired reclining angle.
recommended the BEST 11 RECLINER CHAIRS
continue how to fix a recliner chair
